CNC DRILLING MACHINE
Model:
ZK4120
8.4 inch true color LCD monitor,Bus connection interface, Both horizontal and vertical profiles. The front end reserves the U disk interface, and the back end reserves the RS232 serial communication interface.16 operation panels IO are reserved on the back side of the system Provide differential type external handwheel interface.
Keywords:
CNC DRILLING MACHINE
Category:
Download:
Whatsapp:
Product Description
8.4 inch true color LCD monitor,
Bus connection interface, Both horizontal and vertical profiles. The front end reserves the U disk interface, and the back end reserves the RS232 serial communication interface.16 operation panels IO are reserved on the back side of the system Provide differential type external handwheel interface.
Main technical parameters
| Z-axis travel(mm) | 125 |
| Distance between spindle end to table(mm) | 630 |
| Distance between spindle center to column surface (mm) | 240 |
| Table size mm | 280 x 300 |
| T-slot （widex number xspace） | 14x2x200mm |
| Allowable load kg | 50 |
| Motor of spindle kw | 1.1 |
| Speed of spindle | 365-3150 r/min |
| Spindle taper(mm) | MT2 |
| Motor of Z axis | 5 Nm |
| Rapid feed rate mm/min | 4 |
| Cutting feed rate mm/min | 0.5 |
| Positing feed rate mm | 0.06 |
| Repeat ability | 0.04 |
| Power requirement KW | 1.3 |
| G.W/N.W(kg) | 170 |
| Packing size(cm) | 82×52×113 |
Previous Page
Previous Page
Related Products
Certification
Consultation
You can fill out the form and send it to us, or you can contact us on WeChat!
Faithful Technology Park, No.26 Road, East Development Zone, Huanghua, Cangzhou, Hebei Province, China 061100
Feedback